This is part 5 of a 5 part Series covering the procedure for considering a rewire of an older home and the steps we take to rewire a home. We have also answered a few common questions. Take a look at our other blogs.
- Outlets, switches and branch circuits, This would be the next step. We would then asses what you have and what you need (Like if you have GFCI outlets and the proper protection). The condition of the existing wiring if and what should be replaced. At this point is where we see if any of the home has been rewired and its condition. This is the point that we usually have to tell the home owner that they are looking at a complete rewire. I’ll personally tell you its not fun to be the guy telling someone that its going to cost allot of money but its great that we can at least give them an option to help get their house up to this century.
- Copper wire is increasingly expensive, so just the materials alone for rewiring a typical home can have a high cost
- Having an electrician rewire your home can take allot of hours and speciality trained guys. To upgrade to a 100 amp electrical panel generally takes about 6 to 10 man hours and that is for a trained professional – licensed Journeyman.
- The average older home of about 1200 to 1800 sqft takes on average around 2 weeks of labor to rewire for 2 guys minimum. This is with good attic and basement access
- These can vary from home to home
- This is why we always come out and give you a free estimate before we proceed with any work
Things that could be included:
- If your house is on a concrete slab or doesn’t have an attic (or both), it will probably be necessary to cut open the walls about 2 feet up from the floor, as well as cutting through the ceiling joists.
- Rewiring a home requires a building permit and inspections of the work at certain stages in project; check with your local planning department for specifics. All wiring must meet the National Electrical Code, but local building regulations can also affect the scope and cost of your rewiring project.
Disclaimer: This is an informational blog only, always hire a licensed insured electrical contractor to work on your home or business.