Business Time Savings

A little bit of foresight can go along ways when hiring out a Service.  Having the right people with the knowledge and know how to do the maintenance and repairs correctly the first time is not only a Money Saver but it is a Time Saver. I have found the time savings to be very important. So please take into consideration the cost of your time and schedule when you hire anyone especially in a service industry. 

 

Things to Consider – Part 1

This is a 5 part Series covering the procedure for considering a rewire of an older home and the steps we take to rewire a home. We have also answered a few common questions

Have you ever thought about how much it would cost to rewire a house? Or maybe the steps you would have to take? What about the cost of an upgraded electrical panel and the steps for that? If you answered yes, then pay close attention because I am going to go through the steps and process to these questions to help you get a better understanding.

  • 1
  • Before you get to deep into our process on what a home needs for a rewire. Lets talk about the options. First we can usually break this up into sections for you. We would start by 1st (permitting) then Upgrading the meter base. 2nd we would then replace the feeders from the meter to the Electrical power panel. 3rd we would replace the Main Electrical panel with all new breakers. Then after this work we would start on the branch circuits these are for the outlets, switches lights etc throughout the home. This is usually the process if not we run into road blocks like not having enough breakers or a multitude of other things get in our way. so we think of the meter base, main feeders and the panel Like being the heart of your home then the circuits are the arteries running everything out to where the energy is used.

Stay tuned for the next part of this 5 part series!

Disclaimer:  This is meant as an information blog only, as always please contact a license and insured electrical contractor to work on your home or business.

Burnt Wires

Well I came across another burnt up wire today.  This was to a dryer it appears durning construction the electrician didn’t tighten the terminal down enough and over time it became loose.   When this happens corrosion will build up and over time this will cause more resistance and this causes heat, then you end up with burnt and damaged wires at the least. In this case it burnt out the side of the plug and caused damage to the box as well the box did its job it contained the fire damage but it was no longer usable.

So to fix this- the wire had allot of damage I cut in a new box below this old one because the conductors fed up from below this gave me more length to work with and I was able to cut out all of the damaged conductors to get to clean copper and good insulation. Then I installed the new plug (in this case we up graded to a 4 wire dryer plug and we replaced to dryer cord as well) we then proceeded to test the plug then the machine everything was back to normal and working correctly.

If you look close you can also see the damage to the box the top right its sagging down and no longer has the correct protection to use for Electrical at all.

Disclaimer:  This post was meant as an informational post.  As always, have a licensed insured electrician work on your home.

Hiring the right Electrical Company/Electrician

We talk a lot about “make sure you hire a licensed and insured electrical company to do your work”   But do you know how or what to look for?

images-4

Why should I pay more money to hire a licensed Electrician than an unlicensed Electrician?  All Electricians- Master and  Journeyman – Have a minimum of 4 years schooling and on the job training and then they have to qualify and test with the state before the board approves them to be a licensed journeyman then another 3 years minimum before they can test to be a Master Electrician.

 

They are all required 16 hours continuing Ed every two years (state law)  to renew their licenses.  Continuing Ed goes over the new laws and new requirements.  Electrical Contractors have to have an additional 8 hours to renew their licenses.    This is to keep the workers up to date on everything.  NEC (National Electrical Code) also puts out an expensive book every two years that electricians have to go by.  OSHA has requirements that Electricians have to abide by also.  So, if you have a licensed Electrician, vs an unlicensed electrician,  more than likely they are up to date on all the continuing laws and regulations.  Really, who would you rather have working on your home?  You can ask to see their licenses, it is required that they carry it on them. You can look on the state website DOPL to check if their licensing is current also. Its fast and easy to check.

70hb17__19327-1470923198

Why should I make sure my Electrician has insurance coverage?   Insurance coverage for contractors covers both the electrician and the homeowner.

How can I know my Electrician has the right experience:   Talk to your Electrician to see what work they have done in the past.  This will help you know if they are able to do the work you need.  Also talk to friends and neighbors about their experiences and check out reviews online.

Make sure your Electrician listens to what you need and want and what your concerns are:  Make sure they know what your problem is and they are addressing the right problem.

Remember, it might feel like you are saving money to do the work yourself, but we get lots of calls that start out with “I was just doing ** and now I have no electricity in my home.”   Electricians have to go to school to learn what they do professionally, you wouldn’t go to your next door neighbor and ask them to put your braces on, right?

 

unknown-2

 

Disclaimer:  Remember what you just learned, always call a licensed and insured up to date Electrician to safely do work on your home. The way you want it done.

stamp

Screen Shot 2015-12-31 at 11.46.59 PM

 

Most Common Electrical Questions!

I decided to do a post on the most common electrical questions.  Lets see if we can help you with any of your questions.

images

1.) I want to install a fan, but why do I have to change my light box to a fan rated box?

A fan rated box, although it may look like a light box, is rated to hold the weight and the movement of the fan.  You do not want the ceiling fan to break the box and fall out of the ceiling putting you and your family in danger.  Important to remember, it is required by the National Electrical Code.

unknown

2.)   Why does my breaker keep tripping?

One reason is too many devices plugged into that circuit and you are overloading the breaker.  There can be many other simple or complex reasons also, please call a licensed insured electrician to check your wiring, it could be a mis-wired outlet or switch, A nail holding a picture up is sticking into the wire, an outlet could have a short, failure of a device. another reason is possibly rodents in the attic or walls this create a big  problem if the short is in theses it can spark and ark in the walls an its a possible fire hazard

Unknown-1

3.) Do I really need a surge protector for my whole house?

Yes, any extreme weather can short out your tv, fridge, computers, any electrical appliance.  A surge protector for your home costs only a small percentage to replacing all of your appliances, plus the peace of mind during a lightning storm! or if there is a transformer that gives out at any possible time.

5567a27a-f675-49d1-ba2a-dbba9640f4e6_1000

4.) Should I worry about outlets that don’t work?

Yes, because you don’t know if the problem is with that outlet or further down the wiring causing future problems for the rest of your wiring.

IMG_1714

5.)  Why should I pay an electrician when I can u-tube the problem and do what the video says?

The Main reason is they have the experience train and know how to find and repair in a timely and most of all a safe manor and Because qualified, licensed electricians have continuing education they have to complete every two years to keep their licenses.  They have worked and studied to help you with your electrical problems.  They are professionals and know what they are doing and a video can’t watch for other problems that could occur.

Most of all its dangerous after all it is Electricity your dealing with.

electrician-superpower-professions-t-shirt-women-s-t-shirts-womens-premium-t-shirt

6.) How many smoke detectors/carbon monoxide detectors do I need in my house?

You must have 1 smoke detector on every floor, 1 inside each bedroom in every hallway and at the highest peak of the interior. Code also requires at least one carbon monoxide detector on each level of the home.

unknown-1

 

stamp

Screen Shot 2015-12-31 at 11.46.59 PM

 

Disclaimer:   This is an informational article only,  Please always all your local licensed and insured electrical contractor to do your electrical work!

Service – before and after photos

We have taken some photos on some jobs to post and show you what your service should look like on the side of the house.  Lets have some fun!

If you have hanging wires like this, call me!  We can get it cleaned up and safe!

They will be above the roof correctly when we are done.

IMG_1361

Before, See the dangerous wire mess!

IMG_1393

During, a closer look at the mess!

IMG_1497

After, not completely all done, but look how nice and clean that looks!

IMG_1499

Before, see all the wires handing and all over.

IMG_0176

After, look how nice this looks with the wires in conduit for protection.  Nice and clean. and They are Safely above the roof and much higher above the drive way.

IMG_1392

Before:  Do you see this conduit, its not even connected.

IMG_1405

During, We care about your lawn and plants.  We carefully removed the plant and dirt around it.

IMG_1398

During, We got the pipe fixed and bolted to the house.  Repaired done and safe.

IMG_1400

After, notice we got the plant back in, and everything looking nice and clean.

Almost like we weren’t even there.

IMG_1404

Screen Shot 2015-12-31 at 11.46.59 PM

Disclaimer:  Always have a licensed, insured, electrical contractor take care of your electrical needs.  Always know the state and local laws when working with electrical.

Sabin Electric is a licensed, and insured Electrical Contractor.  Call for all of your Electrical needs including, residential, commercial, industrial, solar, and any service work!  We serve everywhere in the Salt Lake County and Utah County areas.  No job too small – Give us a call  8013585170.

Knob and Tube Wiring – Dangerous!!!!

Do you live in a home that was built between 1880 and 1940?  Have you had the Electrical replaced since then?  Commonly used in these old houses are what is called Knob and Tube Wiring.  It is considered to be DANGEROUS!  If you do, you need to have your home inspected right away and new Electrical system installed.

1280px-Support-knob
Knob-corner

 

Some of the biggest safety problems are the lack of a ground conductor, and the switches were often placed on the neutral wire, turning off the circuit, but not the current.  Some people say when this was installed correctly, it was superior to how it is done now.  Due to age and new safety procedures, though, these practices are severely outdated and cause a significant safety hazard.  Some people try to tie into the old wires with new wires which the old wires are not rated for the new loads.  This can cause the disintegration in the insulation around the wire, which is there for your safety and for your homes safety.  Also, through the years, dust and mice are most likely to have corrupted the protection tubing also, leaving copper wiring open and unprotected.  People have also tried to insulate their homes around the Knob and Tube wiring and this is also a huge fire problem, the Knob and Tube Wiring were meant to be left open to cool, so covering them with insulation, is very, very dangerous.

When these systems where built they had no idea that we would have all of life’s extra little things to help us out.  All they had was one light and outlet in each room and if they were lucky a fridge.  Now there is an outlet or two on every wall, custom can lighting and iPhones, I pads, computers, laptops, and iPods to charge daily and everything else you can think of.  The old systems just can’t hold the loads.  I can go on and on about the dangers but I want you to be able to sleep at night !

knob-and-tube

Homeowners Insurance Companies don’t like to insure homes with this type of wiring in it because of the potential danger.  Some require it to be inspected and signed off to be safe and some require it to be replaced. So, like always, have your home inspected by a certified, qualified, licensed, insured, Electrician.  Know your local and state laws about home requirements.

stamp

Sabin Electric is a licensed, insured Electrical Contractor who works with all the different Electrical needs.  Giver us a call – 8013585170!

Screen Shot 2015-12-31 at 11.46.59 PM